Trouble Configuring Trendnet Router

Home Forums General Firewall Help Trouble Configuring Trendnet Router

  • This topic is empty.
Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #29786
    bselin
    Participant

    I am unable to configure my router to allow access to the Cerberus FTP server. I have a Trendnet TEW-452BRP router. The log from Cerberus is below:

    Dec 28 14:57:51 Added to Windows Firewall Exception list

    Dec 28 14:57:51 Shutting down local Interface 10 located at 192.168.1.100

    Dec 28 14:57:51 System: Intel Pentium IV

    Dec 28 14:57:51 Number of Processors: 2

    Dec 28 14:57:51 Operating System: Microsoft Windows XP Home Edition

    Dec 28 14:57:51 Cerberus FTP Server started on ‘Brent’

    Dec 28 14:57:51 Interface 11 listening at 192.168.1.100 on port 11000

    Dec 28 14:58:03 12 Incoming connection request on interface 192.168.1.100

    Dec 28 14:58:03 12 Connection request accepted from xx.xx.xx.xx

    Dec 28 14:58:06 12 USER Henry

    Dec 28 14:58:06 12 331 User Henry, password please

    Dec 28 14:58:06 12 PASS ***********

    Dec 28 14:58:06 12 230 Password Ok, User logged in

    Dec 28 14:58:06 12 SYST

    Dec 28 14:58:06 12 215 UNIX Type: L8

    Dec 28 14:58:06 12 FEAT

    Dec 28 14:58:06 12 211- Additional features supported include: MDTM SIZE REST STREAM AUTH TLS AUTH SSL PBSZ PROT LANG EN* SITE CHMOD SITE PSWD 211 End

    Dec 28 14:58:06 12 PWD

    Dec 28 14:58:06 12 257 “/” is the current directory

    Dec 28 14:58:07 12 TYPE A

    Dec 28 14:58:07 12 200 Type ASCII

    Dec 28 14:58:07 12 PASV

    Dec 28 14:58:07 12 227 Entering Passive Mode (xx,xx,xx,xx,43,2)

    Dec 28 14:58:07 12 LIST

    Dec 28 14:59:14 13 Incoming connection request on interface 192.168.1.100

    Dec 28 14:59:14 13 Connection request accepted from xx.xx.xx.xx

    Dec 28 14:59:15 13 USER Henry

    Dec 28 14:59:15 13 331 User Henry, password please

    Dec 28 14:59:15 13 PASS ***********

    Dec 28 14:59:15 13 230 Password Ok, User logged in

    Dec 28 14:59:15 13 SYST

    Dec 28 14:59:15 13 215 UNIX Type: L8

    Dec 28 14:59:15 13 FEAT

    Dec 28 14:59:15 13 211- Additional features supported include: MDTM SIZE REST STREAM AUTH TLS AUTH SSL PBSZ PROT LANG EN* SITE CHMOD SITE PSWD 211 End

    Dec 28 14:59:15 13 PWD

    Dec 28 14:59:15 13 257 “/” is the current directory

    Dec 28 14:59:16 13 TYPE A

    Dec 28 14:59:16 13 200 Type ASCII

    Dec 28 14:59:16 13 PASV

    Dec 28 14:59:16 13 227 Entering Passive Mode (xx,xx,xx,xx,43,3)

    Dec 28 14:59:16 13 LIST

    Dec 28 14:59:38 12 Timeout while waiting for connection

    Dec 28 14:59:38 12 Unable to accept passive connection

    Dec 28 14:59:38 12 425 Unable to open the data connection

    Dec 28 14:59:38 12 The connection was closed by the remote socket

    Dec 28 14:59:38 12 Connection terminated.

    I have added virtual servers to my router for ports 11000 and 10999. Not sure what I have setup in correctly. Any help appreciated.

    #34986
    mdj
    Participant

    You need to forward the passive port range too. Check out the FAQ, there is an entry there describing it.

    #34987
    bselin
    Participant

    I have created a firewall rule on my router to allow TCP traffic on ports 10000 – 12000 but still receive the error. The port number that FileZilla is trying to reach is the same as the one that is registered in the log file. Any other ideas.

    #34988
    mdj
    Participant

    Then you should look at the ip address in the passive command. Is it the right external address of your router? Perhaps the router is “intelligent” and messes with the address? Is the right ip address shown in the FileZilla log?

    #34989
    bselin
    Participant

    I finally was able to get it working. I had to change the PASV options for the interfaces to autodetect instead of using a different IP for the PASV option. Thanks for the help.

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.
Close Cart

Shopping Cart