clients ip address is not visible in the log

General help on how to use Cerberus. Questions on how a particular feature works, how to use feature x with feature y... Please read the "How to use this forum" article before posting.
Post Reply
cerbjoel
Posts: 2
Joined: Fri Oct 13, 2017 8:15 am

clients ip address is not visible in the log

Post by cerbjoel » Fri Oct 13, 2017 8:27 am

Hi,

just setup cerberus ftp server and made the first steps. :)
ther server is behinde a firewall and the needed ports was opened and successfully tested.

My problem is: when a client logs in, i see the firewall ip address in the log only. Not the real ip of the client.
So i can't use the ip auto blocking.

Is this problem caused by the firewall or not available by cerberus or do i have to change something?

Thanks

cerbjoel
Posts: 2
Joined: Fri Oct 13, 2017 8:15 am

Re: clients ip address is not visible in the log

Post by cerbjoel » Fri Oct 13, 2017 9:05 am

we found the solution - was caused by the firewall :-)

Post Reply