FTP Server Behind 2 Routers

This forum is for anyone experiencing problems related to their firewall settings. More specifically, anyone experiecing connection issues should take a look at this forum.
Post Reply
dlaviana
New User
Posts: 3
Joined: Mon Aug 13, 2012 3:57 pm

FTP Server Behind 2 Routers

Post by dlaviana » Mon Aug 13, 2012 4:07 pm

I am new to FTP, and reviewing the installation instructions. The computer I plan to use as the FTP server is located behind 2 routers. The first router connects to the internet, and is the DHCP server for the network. This router then cascades to a 2nd router in another building. That router is used to connect the computers in that building to the network and internet. It doesn't provide DHCP; it's being used as a switch / wireless access point. My question is - do I need to configure port forwarding in both routers, or just the first router?

Thanks for your help.

Dave L.

User avatar
Serin
Site Administrator
Posts: 1785
Joined: Sat Jan 01, 2005 6:57 pm
Location: United States
Contact:

Re: FTP Server Behind 2 Routers

Post by Serin » Mon Aug 13, 2012 9:52 pm

Hello Dave,

If the second router is just acting as a switch and it's really just one network, then no, you don't have to enable port forwarding on the second router. You do have to enable port forwarding from the Internet facing router and redirect to the appropriate machine. If your second router is actually separating two networks then you may have to specifically allow the inbound traffic. It depends on how the network is configured. I would try it with just the Internet router configured for port forwarding first.

Post Reply