How do I do port forwarding? I have (Linksys)

This forum is for anyone experiencing problems related to their firewall settings. More specifically, anyone experiecing connection issues should take a look at this forum.
Post Reply
melaniechann
Posts: 1
Joined: Thu Jun 10, 2004 1:27 pm

How do I do port forwarding? I have (Linksys)

Post by melaniechann » Thu Jun 10, 2004 1:30 pm

How do I do port forwarding? I have (Linksys)

I wanna port it to 21

Iv'e turned off all my firewalls, but no one can't get the files.. I placed the files in a link.

User avatar
Serin
Site Administrator
Posts: 1785
Joined: Sat Jan 01, 2005 6:57 pm
Location: United States
Contact:

Post by Serin » Sun Jun 13, 2004 1:59 pm

Please check out the linksys website/ router manual for info specific to your linksys router. They have instructions on how to configure port forwarding.

Guest

Post by Guest » Thu Jun 17, 2004 8:46 pm

for my linksys you have use the HTML interface, I think the defalt is 192.168.1.1?

login: agian I think defalt is admin:admin or admin: no pass

go to advanced tab
go to port forwarding

find the UPNP forwarding button and click it

Now you should see FTP port 21 and you can define port 20, and enable them both.

brice
Posts: 2
Joined: Thu Jun 17, 2004 8:07 pm

Post by brice » Thu Jun 17, 2004 9:02 pm

sorry for got, also make sure that port 20 is open for sending on your computer.

Pyrophorus
User
Posts: 13
Joined: Mon Jun 28, 2004 5:25 pm
Location: Eastern side of the GTA
Contact:

Post by Pyrophorus » Mon Jun 28, 2004 5:29 pm

I've done that all, and going through the browser to my IP number, I still
get the port is closed due to security reasons

Pyrophorus
User
Posts: 13
Joined: Mon Jun 28, 2004 5:25 pm
Location: Eastern side of the GTA
Contact:

Post by Pyrophorus » Mon Jun 28, 2004 6:27 pm

Ok, I got it working...through the cmd line on the other computer

off to the genral list and thanks

Post Reply