Page 1 of 1
Posted: Fri Oct 31, 2014 5:40 pm
How do you access the web client in the enterprise edition?
Re: Web Client
Posted: Mon Nov 03, 2014 11:14 am
By default, the web client is available on all IP addresses on the Cerberus machine on port 443.
From the the machine running Cerberus FTP Server you could type https://127.0.0.1/
Or, the machine's IP address from any machine on the network.
If you are trying to access it from outside of your network, you will need to have an external domain name that points at your public IP address. You will also need to make sure your router is redirecting HTTPS traffic to the IP address of the machine on your internal network that is running Cerberus FTP Server. It's the same process for any internal service you wish to make available from the Internet.