SSL accept error "point is not on curve"

Questions dealing with specific FTP clients and Cerberus FTP Server.
Post Reply
Renaud
New User
Posts: 3
Joined: Fri Feb 03, 2017 4:16 pm

SSL accept error "point is not on curve"

Post by Renaud » Fri Feb 03, 2017 4:39 pm

Hello,

I'm using cerberus version 8.0.9.0 and ftpes connections sometimes fails, with the following message in the log file (debug mode has been enabled) : "SSL accept error: A failure in the SSL library occurred, usually a protocol error: point is not on curve".
It comes just after "AUTH TLS" and just before "Unable to establish SSL connection".

Is it a bug in my configuration ?... It happens only with 1 ftpes client, there's no issue with the other ftpes clients and yet the configuration is the same for all of them (<=> same paramters in the "Profile" and "Constraints" tabs of the "Users" window)

kind regards

Renaud

pacman
Senior User
Posts: 187
Joined: Thu Apr 28, 2016 1:54 pm

Re: SSL accept error "point is not on curve"

Post by pacman » Mon Feb 06, 2017 2:13 pm

We would need to see your log file showing a failed connection and an successful connection.

If you have a moment please submit a support request.

https://support.cerberusftp.com/hc/en-us/requests/new

Renaud
New User
Posts: 3
Joined: Fri Feb 03, 2017 4:16 pm

Re: SSL accept error "point is not on curve"

Post by Renaud » Fri Feb 17, 2017 2:40 pm

Thank you. I've done so.

kr

Renaud

Post Reply