Page 1 of 1

SSL accept error "point is not on curve"

Posted: Fri Feb 03, 2017 4:39 pm
by Renaud
Hello,

I'm using cerberus version 8.0.9.0 and ftpes connections sometimes fails, with the following message in the log file (debug mode has been enabled) : "SSL accept error: A failure in the SSL library occurred, usually a protocol error: point is not on curve".
It comes just after "AUTH TLS" and just before "Unable to establish SSL connection".

Is it a bug in my configuration ?... It happens only with 1 ftpes client, there's no issue with the other ftpes clients and yet the configuration is the same for all of them (<=> same paramters in the "Profile" and "Constraints" tabs of the "Users" window)

kind regards

Renaud

Re: SSL accept error "point is not on curve"

Posted: Mon Feb 06, 2017 2:13 pm
by pacman
We would need to see your log file showing a failed connection and an successful connection.

If you have a moment please submit a support request.

https://support.cerberusftp.com/hc/en-us/requests/new

Re: SSL accept error "point is not on curve"

Posted: Fri Feb 17, 2017 2:40 pm
by Renaud
Thank you. I've done so.

kr

Renaud