Upon some tinkering I accidentally reset the FTP server, I went back to the same options area and the text box was now filled with my external address. Is this supposed to happen? I was under the impression the text box created from my ticking that box should be the server's local IP address and not my external IP address.
Let me know if something is up or if I am not understanding how interfaces work. Thanks!
This is with FTP version 2.47.
I am following this instructions from the FAQ:
It is changing my input of the local IP address to my external IP address.To resolve the issue, you have to change Cerberus' PASV IP to be your internal LAN IP and not the external IP you get from your Internet Service Provider (ISP).
Steps to resolve:
1. Go to Configuration -> Server Manager -> Interfaces
2. Click on the interface that matches your internal IP
3. In the PASV Options section click the "Use different IP for PASV command" radio button and in the textbox that appears put in the same IP as the interface (your local IP address).
4. Click the "Ok" button